
MMX Performance
SUPERIOR PERFORMANCE ON ROAD & TRACK
The BMW N54, N55, and S55 engines are no strangers to oil cooling problems, that’s why we recommend installing the Mosselman Oil Thermostat. Instea...
View full detailsGosling Racing seat mounts offer an safe way to install a Wide range of bucket seats. Modular by design, Build the kit at the bench and install com...
View full detailsRTS Performance Brake Discs – Front Fitment (RTSBD-0140F) 340mm RTS Performance has developed a comprehensive range of Brake Discs and Pads for al...
View full detailsThe full plug and play EKPM3 cooler kit is designed specifically for F20/F22/F30/F31/F34 BMW's using an EKPM3 fuel pump control module. This is rec...
View full detailsThis BIG brake kit will allow you to run the 380mm M2/3/4 brake discs whilst using your original 340mm calipers. This kit comes as brackets only or...
View full detailsDesigned and engineered in-house in the UK, the MMX rear subframe insert kit for the BMW F2x and F3x chassis is designed to limit movement in the f...
View full detailsFREE WEAR SENSORS WITH ALL EBC BRAKE PADS DISCOUNT AVAILABLE WHEN ORDERING WITH EITHER BRAKE FLUID, DISCS OR BRAIDED LINES! Yellowstuff ⁃ A firs...
View full detailsEvery individual line pressure tested after assembly Factory built (not workshop made from components) Best fitment guaranteed Identical routing ...
View full detailsWorld's First custom flash tuning platform for the BMW F and G series vehicles. Cloud based solution with a web based interface for use with a...
View full detailsAs standard, the front camber on the BMW F80 F82 F87 M2 Competition M3 M4 is not adjustable. Unfortunately, the camber angle the car is supplied wi...
View full detailsWe built the N55 engine for Bruce's M2 back in 2022 and its still going strong in 2024 after 2 years doing Dutch Time Attack rounds along with multiple UK and European track days. The original engine failed after a bad...
This is Stuarts M140i which is now fitted with all the right parts!! It came in already running a Pure800 turbo and some good suspension and brake mods. But this time it was here for some more power and an...
Stuart's M4 has been in with us a few times now for various work. As with most S55 powered cars one of the first jobs was the crankhub, for this we used the 4 pin hub from Insane Performance, next...