Forge Motorsport

BMW B58 Bundle

The Forge UNOS boost controller is a ball and spring CNC machined to aircraft grade specifications and incorporates a ratchet type top adjuster tha...

This adaptor plate installs between the boost (MAP) sensor and mounting surface to allow a tapping to run a vacuum operated valve or for connection...

Boost gauge fitting kit for the EA888 Gen 3, VAG 1.8 and 2.0 Tsi engines found in many new vehicles including the Golf Mk7, Audi S1, Audi S3 (8V ch...

Forge Motorsport Boost Tap for the Ford Mustang 2.3 Ecoboost and the Mk3 Focus RS. This adaptor plate is installed between the boost (MAP) sensor a...

This only fits vehicles from 2022 onwards This adaptor installs in between the intake manifold elbow and the vacuum pipe coming from it. Behind ...

Forge Motorsport Boost Tap Kit for 1.5 TSI Engines and late 1.4 TSI engine from 2018 onwards and the Ford Focus ST280 This adaptor installs inbe...

For all those wishing to install a boost gauge to their 2.0 litre FSiT engines (suitable for all VAG TSI and FSI turbo engines), we have a CNC inli...

This kit comprises of four silicone hoses complete with CNC alloy couplers and the highest quality stainless steel clamps. These hoses will withsta...

Uprated Silicone boost hose kit for the VW T5.1, 2.0TDI 84/102/114/140BHP The Forge Motorsport kit comprises of four silicone hoses complete wit...

This kit comes as a set of four boost hoses for the Audi RS3 8Y with the DNWA engine codes. These include pre and post intercooler hoses, turbo out...

This will NOT work with the OEM intercooler. This product will only work with aftermarket intercoolers with an outlet size of 63-67mm (Cold Side). ...

The Forge Motorsport boost tap for the 2015 1.2 TSI engine codes CJZA, CJZC, CJZD, CYVB as found in the Skoda Fabia, Skoda Octavia, VW Golf, VW Pol...

Caliper Replacement Seal kit for 6 pot Calipers

Replacement reinforced silicone breather hoses for the VAG 150/180 BHP 1.8T engines. A known problem is the failure of the OEM rubber hoses afte...

High quality 2x2 twill prepreg carbon fibre Coated with anti UV gloss gel coat Easy installation with full kit provided Located in OEM fa...

Forge Motorsport have a worldwide reputation of making industry leading parts for an array of performance vehicles; as such we’ve been able to work...

Average gains of 5.5bhp Gains of 16bhp at peak and average of 10bhp from 4500rpm when coupled with FMTIA5/9 Average gain of 20NM of torque ...

Highlights: Reduced inlet air temperatures Better throttle response Fits both right and left hand drive vehicles Easy to fit Lifetime...

+11 BHP  +19NM Torque Induction kit and inlet hose included Improved induction noise Full instructions Prepreg 2x2 twill formed carbon...

If you have already purchased the inlet hose for your vehicle (FMINLH25), this product is the carbon intake ONLY. For the full kit, please see FMIN...

*Please note - this will not fit with Nightvision unless it is removed* Forge Motorsport Charge Cooler Radiator for the Audi RS6 C7 and Audi RS7...

FMDV41 is our blow off valve solution for the PSA 1.2 PureTech engine, which is found in most Peugeots and Citroën models from 2017 till present (...

Greater air flow for power and performance increases High flow foam air filter Compatible with left and right-hand drive vehicles High-qua...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Dump / Blow Off Valve Fitting Kit.   In The Box: ...

This kit lowers by around 30mm The Forge Motorsport suspension tested in conjunction with EV Specialist Cleevely EV gives you the best balance b...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Dump/Blow Off Valve Fitting Kit.   In The Box: 1 x Sili...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner This is a piston design bypass valve that is a direct r...

This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be assembled w...

This precision-machined bush insert has been carefully designed to reduce the range of movement in the OEM Lower Dogbone bush that counter ac...

This precision-machined bush insert has been carefully designed to reduce the range of movement in the OEM Lower Dogbone bush that counter ac...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Suitable for most turbo cars with an Air Flow Meter.  ...

FMBH7 is yet another performance upgrade product for the Hyundai i20N, perfectly complimenting the parts we have already released. This dump valve ...

Utilising world leading springs for more precise operation and consistency All internal and external valve components have been made in the UK...

Highlights: Made from billet aluminium for durability Hand polished in the UK for a sleek appearance Creates the iconic "Whoosh" sound as...

This kit totally replaces the plastic pipe from turbo to manifold with a silicon hose Available in a choice of colours Full kit included in...