Forge Motorsport

This part replaces OEM part P9813218680 - EP6 Engine Forge Motorsport are proud to present a complete plug and play intercooler solution for the...

Following the success of our FMINT15 for the Hyundai MK3 i30N it was only obvious we should further development on the face lift MK3.5, with only a...

A superbly hand fabricated and British manufactured intercooler designed exclusively for Deranged trucks and suitable for the Mercedes X class truc...

Hand fabricated Lightweight - Tube and Fin core Stepped core design 41% capacity increase over OE intercooler Gains of 8bhp (see descri...

With the known deficiency of the RS250/265/275 Radiator in hot climate conditions, we were asked to develop a front mounting intercooler with a min...

Gains of 10bhp and 10lbft Temperature drops of up to 20C Reduced turbo lag, increased response Greater overall surface area for greater he...

FMINT24 is a performance intercooler for the 2021 onwards MQB platform 2.0 DNF code EA888 EVO4 engines. Produced, designed, and tested, at our head...

This intercooler has been specifically designed for the VW T5.1 fitted with the twin turbo diesel. Using a combination of greater core size and the...

This fits on intercooler part no. 28270-2B710 Due to the location of the OEM valve, there is limited space as it fills the gap between the top o...

This Silicone replacement hose fits from the throttle body to the intercooler, on the Polo 1.8 GTI or SEAT Ibiza MK3 (6L) 1.8T. It can be fitted wi...

This will fit engine codes AXX, BWA, BWE, BPY (K03 Turbo) This part will enhance the sound of the turbo spooling and improve response due to its...

Dump / Blow Off Valve Fitting Kit.   In The Box: 1 x 35mm Hose Clamp 1 x 25mm Blanking Plug 1 x Forge Sticker

This actuator is designed for the Audi A4 and Volkswagon Passat 1.8T engines that are longitudinally mounted. ( crankshaft of the engine runs inlin...

A set of 5 Silicone Coolant hoses for the MK5 2 Litre Golf. These hoses are sold as an additional set to our FMKC010 hose kit and are often referre...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner With great looks and performance to back them up, the Maz...

This turbo blanket should be fitted OVER the existing OEM heat shield The Forge Motorsport FMTUBL9 has been designed for the Mercedes A45, GLA, ...

At Autosport 2005, we were proud to release our uprated Intercooler for the BMW Mini Cooper S. After a comprehensive development program involving ...

A silicone intake hose for the R53 model (up to 2007) BMW Mini Cooper S (Supercharged). Available in blue, red, or black   The Forge si...

Forge Motorsport accept no responsibility for damage caused to the vehicle by incorrect installation or setup of this product As the official an...

As the preferred and official supplier of intercoolers to Mini Challenge, we are proud to present our intercooler for the Mini JCW F56 Chassis (201...

This Forge Motorsport high flow intake charge hose fits to the throttle body at the rear of the engine bay and is specifically designed to fit the ...

Forge Motorsport accept no responsibility for damage caused to the vehicle by incorrect installation or setup of this product As the official an...

A replacement polyurethane bush for the Forge Motorsport Mini adjustable rear tie bars.  FMRCAM and FMRCAMF56 Please note that one pair is re...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Made from billet aluminium, this atmospheric diverter v...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Made from billet aluminium, this atmospheric diverter v...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Made from billet aluminium, this recirculating diverter...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Made from billet aluminium, this atmospheric diverter v...

These actuators are designed for the Mitsubishi GTO (3000GT) twin turbo engines (priced per pair). Manufactured from Billet aluminium, these Forge ...

The Forge Motorsport high flow intake hose for the MQB platform 2.0 engines, eliminates the highly restrictive plastic inlet pipe, and replaces it ...

The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone with a ...

Neotech Dump Valve Diaphragm

This actuator is designed for the Nissan GTIR. (the version that has a bent actuator rod) Forge Motorsport were one of the first company’s in th...

This actuator is designed for the Nissan GTIR (the version that has a straight actuator rod) Forge Motorsport were one of the first company’s in...

This actuator is designed for the Nissan S14 (the version that has a bent actuator rod) Forge Motorsport were one of the first company’s in the ...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Made from billet aluminium and hand polished in the UK, t...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Made from billet aluminium, this atmospheric diverter v...