Haloween Forge

Gains of 11bhp Improvement of 13lb/ft of torque Choice of hose colour Improved driving experience Made in the UK Lifetime warranty ...

Before fitment, please ensure the spacer fits flat to the back of the wheel. Please also test for clearance after fitment at the wheel arch under f...

This will fit engine codes CCZA, CCZB, CCZC, CCZD Forge has developed this turbo outlet muffler delete pipe for the 177hp 2.0 petrol turbo (TSI)...

25mm Side pipe as used on the following valves: FMDV008/PA FMDVSPLTR FMDVPUNT

32mm Side pipe as used on the following valves: FMBSPLTR    

Before fitment, please ensure the spacer fits flat to the back of the wheel.A Please also test for clearance after fitment at the wheel arch under ...

60mm Clamping Ring for FMDVRAY

 7 piece silicone hose kit to replace the coolant hoses on a VAG 1.8T Golf/Leon/A3/TT The Forge silicone hoses in this kit have been designed...

Before fitment, please ensure the spacer fits flat to the back of the wheel. Please also test for clearance after fitment at the wheel arch under f...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner This twin Piston Blow off Valve is specifically designed ...

This turnbuckle will fit our range of actuators. It has an internal 1/4 UNF thread with a length of 52mm (Measured from the center of the hole to t...

Actuator Rod - Please select the rod you require using the options above (Note: We sell both M6 and 1/4UNF threaded rods). All actuator rods are...

This turnbuckle will fit our range of actuators. It has an internal 1/4 UNF thread with a length of 35mm (Measured from the center of the hole to t...

This turnbuckle will fit many application with a 6.1mm diameter hole and a rod length of 75mm (Measured from the center of the hole to the end of t...

This turnbuckle will fit our range of actuators. It has an internal 1/4 UNF thread. The pin diameter is 7.9mm. Please select the turnbuckle length...

The Forge Motorsport FMTUB11 has been designed for the Alfa Romeo MiTo QV. This turbo blanket is designed to isolate the radiant heat produced by t...

This oil catch tank kit is for the Alfa Romeo Mito 1.4 QV and Abarth Punto EVO. Developed by our in-house development team, not only is it beautifu...

An Alloy Hose connector to convert standard hoses to push fit locking hoses. There are several different sizes available. These are ideally suited ...

An alloy male to male bayonet style 65mm coupler with inline bayonet nipples. This coupler replaces the pressed steel hose coupler that is found o...

An alloy male to male bayonet style 65mm coupler with offset bayonet nipples. This coupler replaces the pressed steel hose coupler that is found...

This intercooler resonator delete hose fits the 2007 onwards BMW Mini Cooper S (N14 engines only).  This hose replaces the two OEM hoses and a s...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner This Blow Off, or Dump valve, is for the Mercedes 2.0 T...

A Pair of Forge Motorsport atmospheric valves for Audi RS4 B9 and RS5 F5. This set comprises a pair of our solenoid operated valves together with a...

Replaces OEM part Number CJ5G-9U465-BA We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner This valve is...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Designed specifically for the AMG A35 enthusiast Forge ...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner This Blow Off, or Dump valve, is for the BMW N13 1.6 Tu...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Atmospheric dump valve for the 2015-on Ford Mustang 2.3...

This hose fits directly to the turbo on the 1.8T 210 and 225 engines. It is made from high temperature resistant flourosilicone compound and nomex ...

A set of four boost hoses and air box coupler hose for the Audi RS3 and Audi TTRS - Please note the airbox hose (centre of the kit image) does not ...

Hand fabricated in the UK Simple installation  Gains up 24BHP  35°C temperature drop 16 litre volume 640mm x 250mm x 100mm Genuine O...

Here we have the Oil Cooler Manifold as seen in our Oil Cooler kit for the Audi RS4 4.2 (B7 2006-2008) - FMOCRS4  This Oil Cooler Manifold repla...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner This set comprises a pair of our solenoid operated valv...

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner A Pair of Forge Motorsport Recirculating valves for the...

A set of four silicone boost hoses for the Audi S1. Forge Motorsport design these hoses so they can withstand pressures that can be experienced ...

Forge were the first company in the world to launch a replacement Front mounted intercooler for the Audi TT225 back in 2014. As the tuners start...

Two silicone boost hoses, turbo to intercooler and intercooler to intake manifold. These are available in a choice of colours and are made to withs...